background image

SJ100 Inverter Specifications

Input
signal

Freq.
setting

Operator panel

Up and Down keys / Value settings

Potentiometer

Analog setting

External signal  
*8

0 to 10 VDC (input impedance 10k Ohms), 4 to 20 mA (input 
impedance 250 Ohms), Potentiometer (1k to 2k Ohms, 2W)

FWD/
REV 
Run

Operator panel

Run/Stop (Forward/Reverse run change by command)

External signal

Forward run/stop, Reverse run/stop

Intelligent input
terminal

FW (forward run command), RV (reverse run command), CF1~CF4 
(multi-stage speed setting), JG (jog command), 2CH (2-stage accel./
decel. command), FRS (free run stop command), EXT (external 
trip), USP (startup function), SFT (soft lock), AT (analog current 
input select signal), RS (reset), PTC (thermal protection), DB (exter-
nal DC braking command), SET (2nd setting selection), UP (remote 
control, accel.), DWN (remote control, decel.)

Output
signal

Intelligent output 
terminal

RUN (run status signal), FA1,2 (frequency arrival signal), OL 
(overload advance notice signal), OD (PID error deviation signal), 
AL (alarm signal)

Frequency monitor

PWM output; Select analog output frequency monitor, analog output 
current monitor or digital output frequency monitor

Alarm output contact

ON for inverter alarm (1C contacts, both normally open or closed 
avail.)

Other functions

AVR function, curved accel/decel profile, upper and lower limiters, 
16-stage speed profile, fine adjustment of start frequency, carrier 
frequency change (0.5 to 16 kHz) frequency jump, gain and bias 
setting, process jogging, electronic thermal level adjustment, retry 
function, trip history monitor, 2nd setting selection, auto tuning, fan 
ON/OFF selection

Protective function

Over-current, over-voltage, under-voltage, overload, extreme high/
low temperature, CPU error, memory error, ground fault detection at 
startup, internal communication error, electronic thermal, CT error

Operat-
ing
Environ
ment

Temperature

Operating (ambient): -10 to 50

°

C (*9) / Storage: -25 to 70

°

C (*10)

Humidity

20 to 90% humidity (non-condensing)

Vibration  *11

5.9 m/s

2

 (0.6G), 10 to 55 Hz

Location

Altitude 1,000 m or less, indoors (no corrosive gasses or dust)

Coating color

Munsell 8.5YR6.2/0/2, cooling fins in base color of aluminum

Options

Remote operator unit, copy unit, cables for the units, braking unit, 
braking resistor, AC reactor, DC reactor, noise filter, DIN rail 
mounting

Item

General Specifications

Summary of Contents for SJ100 Series













Reviews: