manualshive.com logo in svg

Hitachi SF-P75XB, Operating & Installation Instructions Manual, Page: 29 / 32

Share
Download
Hitachi SF-P75XB Operating & Installation Instructions Manual Download Page 29

29

How to Install the Washing Machine

 

■

Connect the washing machine correctly to a grounded AC power 

supply.

 

■

The voltage of the power supply must match the voltage rating of the 

washing machine.

 

■

Do not use extension cords or overload the power outlet by using 

power strips.

 

■

Be sure the washing machine does not wobble.

 

■

Use the spirit level on the washing machine to check for levelness. 

Adjust the adjustable foot if the washing machine is not level.

Loosen

Lock nut

Adjustable foot

Raise

Rotate the lock nut in the direction 

of the arrow to loosen it and 

then rotate the adjustable foot to 

stabilize the washing machine.

Tighten

Lock nut

When the adjustment is finished, 

rotate the lock nut in the direction 

of the arrow to tighten it.

If any of the following problems or other abnormalities occur, immediately 

unplug the power plug and contact your local service center.

 

■

The washing machine does not operate when the power is turned on.

 

■

The power cord is damaged.

 

■

There are abnormal vibrations or sounds during operation.

 

■

There is a smell of burning.

 Connecting  

the power

 Checking 

levelness

 Checking after 

installation

Summary of Contents for SF-P75XB

































Reviews:

No comments