27
How to Install the Washing Machine
Installing the drain hose
1 Lay the washing machine down on its back.
2 Pull the drain hose out of the washing machine.
3 Insert the narrow part of the drain hose into the clamp on the washing machine.
4 Stand the washing machine up.
5 Insert the end of the drain hose into the drain channel.
n
Do not allow the drain hose to be bent, twisted, pulled out and damaged, stepped on, or crimped.
n
Spread a cloth on the ground before laying the washing machine down on its back to prevent damaging
it.
n
Use a knife to cut the end of the drain hose at a 45 degree angle because if the drain channel is shallow
and the end of the drain hose is blocked, it could cause a malfunction.
n
Keep the top of the drain hose no more than 10 cm above the
fl
oor if it crosses a door sill or something
else. If it is higher than this, the water has di
ffi
culty draining and a "C2" error (water does not drain) may
occur.
n
Do not extend the drain hose more than 2 meters from the washing machine.
2 m or less
10 cm or less
How to Install The Rat Guard
Front Side
Carton
Box
Rat Guard
Screw
1. Lie down the machine
on the back side.
●
To prevent scratch,
please place the
machine on carton box.
2. Install a rat guard to
the machine (align the
hole of rat guard with
the hole of machine
base).
3. Put each of screw
(2 positions) to the
rat guard and tighten
them
fi
rmly.
4. Setting the washing
machine.
REMARK : Screws were packing with the rat guard.
Summary of Contents for SF-140TE
Page 31: ...31 Memo ...
Page 32: ...3WPL133051 ...
