background image

© 1998, 1999 Hitachi Koki Imaging Solutions, Inc. All rights reserved.

No part of this document may be reproduced without the expressed permission of 
Hitachi Koki Imaging Solutions, Inc.

The material in this document is for informational purposes and is subject to change 
without notice. Hitachi Koki Imaging Solutions, Inc., assumes no responsibility for 
errors or omissions in this document. No liability is assumed for any damages 
resulting from the use of the information it contains.

TRADEMARK

Hitachi Koki Imaging Solutions, Inc., Digital Document Server, DDS, DDS 32, DDS 
40, DDS 32/40, ScanCenter, and their associated logo marks, are trademarks of 
Hitachi Koki Imaging Solutions, Inc. 
Hitachi and the Hitachi logo are trademarks of Hitachi, Ltd. All rights reserved.

NOTICE TO USER

In an effort to meet the demands of a rapidly changing technology, the manufacturer 
is continually developing new features and functions to meet your changing printing 
or printer needs. As a result, this manual may not exactly reflect future changes made 
to the product. Please be sure to consult all manual updates or addenda when using 
this product’s documentation.

Summary of Contents for SC1























Reviews: