-6-
MN1-5831 Rev.5
MN1-5831 Rev.5
(2) Puncture adapter
The name of each parts is shown in Figure 4 and explanation for each parts is listed in Table 2.
Release lever
Fixing knob
Lever locking knob
Fixed stand attaching hole
Needle groove setting knob
Figure 4 Name of each parts of puncture adapter
Table 2
Name of each parts and explanation
of puncture adapter
Name
Explanation
Fixing knob
This is used to fix the puncture adapter to the probe.
Turning clockwise tightens the screw.
Tighten the screw securely referring to 4-2 “Attaching of the puncture
adapter”.
Needle groove setting knob
Adjust the needle groove width to the diameter of a puncture needle to
be used.
Turning clockwise widens the needle groove.
Refer to the section 4-3 “Setting the needle groove “.
Lever locking knob
This is used to prevent unintentional movement of the release lever.
Securely tighten this knob by turning clockwise if the puncture needle
does not neet to be released.
Release lever
By pressing the release lever, the needle groove widens and the
puncture needle can remove from the puncture adapter.
Fixed stand attaching hole
Used to fix a puncture adapter to a stand used for puncturing.
Summary of Contents for S31KP
Page 2: ...ii MN1 5831 Rev 5 ...
Page 6: ...vi MN1 5831 Rev 5 ...
