6 MAINTENANCE
6-14
(2) Station errors
When an error is found in the IR.Station connected with the IR.LINK module, the error flag of
the NET status and the ALM of the S-register are turned on and the error code is written in the
S-table (shown below).
The module also displays the error in CPU LED.
Error code
Explanation
User response
9001
The station is inactive.
9002
The station is in an abnormal state. (An error
was detected in the station.)
9003
The station is inactive and also in an abnormal
state.
• Power on the station again and
then reset the CPU.
• If this error still recurs, replace the
station.
8020
The initialization instruction was rejected.
8081
When the AUTO mode is specified, the number
of registered transfer bytes does not match the
response I/O size from the station.
8082
When a slot is specified, the number of registered
transfer bytes does not match the response I/O
size from the station.
• SVPT setting does not match
station setting. Set SVPT again
to match station setting.
• If this error still recurs, replace the
station.
Summary of Contents for S10mini IR.LINK
