26 - en
5.1 Cleaning the
fi
lter
The vibration function (switch setting R or RA /switch
②
a) should
be activated at the latest when the volume
fl
ow display
②
c (warn-
ing lamp) lights up or when the warning signal sounds or when the
suction output sinks.
5.2 Automatic cleaning
Filter cleaning is performed (switch setting RA/switch
②
a) auto-
matically during the next working break when the minimum volume
fl
ow level is reached.
6 Emptying the container
NOTE
Only permitted for dust with AGW‘s > 1mg/m
3
Switch the vacuum cleaner off, pull the mains plug out.
▷
Open the latches.
▷
Remove the cover and suction hose from the container.
▷
Empty the container by pouring out.
6.1 Dispose of the
fl
eece
fi
lter bag
▷
Pull the mains plug out
.
▷
Fit mouth protection.
▷
Remove suction hose, close off the suction spigot with a plug*.
▷
Open the side latches, remove the top section.
▷
Carefully pull the
fl
ange off the suction spigot and close off the
fl
ange.
▷
Dispose of the vacuumed up material in accordance with legal
requirements.
▷
Mount a new
fl
eece
fi
lter bag
(see chapter 6.3)
6.2 Dispose of the PE emptying and disposal bag
▷
PE emptying and disposal bag: Switch the vacuum cleaner on,
shake the folding
fi
lter cassettes. Switch off the vacuum cleaner.
▷
Fit mouth protection.
▷
Remove suction hose, close off the suction spigot with a plug*.
▷
Open the side latches, remove the top section.
Before setting aside the top section, switch to >I< position, to
draw up any
fl
oating dust which may exist.
▷
Close off the PE emptying and disposal bag carefully with the
tape provided.
▷
Carefully pull the
fl
ange off the suction spigot and close it off
▷
Remove the PE emptying and disposal bag carefully from the
container
▷
Dispose of the vacuumed up material in accordance with legal
requirements.
▷
Mount a new PE bag
(see chapter 6.4)
6.3 Insert
fl
eece
fi
lter bag
NOTE
Only use
fl
eece
fi
lter bags for dry vacuum cleaning.
▷
Slide the
fl
ange completely over the suction aperture.
NOTE
Operating the rotary slider*
▶
Push the rotary slider* from the inside to the outside, turn
through 180° (see mark) and then push inwards again from
the outside through the suction spigot
▶
Place the rotary slider* in the suction aperture with the mark
▲
pointing upwards.
(* depending on the equipment variant)
▷
Place the upper section on the container and close the side
latches.
6.4 Insert PE emptying and disposal bag*
NOTE
Only the vacuum cleaners class
M
and
H
with special containers
and rotary slider in the suction aperture of types RP250YDM
and RP500YDM are suitable for the use of PE Emptying and
disposal bags.
NOTE
Operating the rotary slider*
▶
Push the rotary slider* from the inside to the outside, turn
through 180° (see mark) and then push inwards again from
the outside through the suction spigot
▶
Place the rotary slider* in the suction aperture with the mark
●
pointing upwards.
▷
Slide the
fl
ange completely over the suction aperture and place
the upper bag opening over the edge of the container.
▷
Place the upper section on the container and close the side
latches.
(* depending on the equipment variant)
000Book̲RP250YDM.indb 26
000Book̲RP250YDM.indb 26
2015/03/06 18:44:57
2015/03/06 18:44:57