background image

– 16 –

AD U TING THE AIR DEF E TOR

1

2

Adjustment of the conditioned air to the left and right.

Hold the vertical air defl ector as shown in the fi gure 
and adjust the conditioned air to the left and right.

 If the “             (AUTO SWING)” button 

is pressed once, the horizontal air defl ector 
swings up and down. If the button is pressed 
again, the defl ector stops in its current 
position. Several seconds (about 6 seconds) 
may be required before the defl ector starts 
to move.

 Use the horizontal air defl ector within the 

adjusting range shown on the right.

 When the operation is stopped, the 

horizontal air defl ector moves and stops at 
the position where the air outlet closes.

!

CAUTION

 In “Cooling” operation, do not keep the 

horizontal air defl ector swinging for a long 
time. Some dew may form on the horizontal 
air defl ector and dew may drop.

RESET

Adjustment of the conditioned air in the upward 
and downward directions.

The horizontal air defl ector is automatically set to 
the proper angle suitable for each operation. The 
defl ector can be swung up and down continuously 
and also set to the desired angle using the 
“         (AUTO SWING)” button.

RAK-25N5
RAK-35N5
RAK-50N5

RAK-65N5

RAK-65N5

RAK-25N5
RAK-35N5
RAK-50N5

(EN3) RAK-25-35-50-65N5.indd 16

11/29/10 2:38 PM

Summary of Contents for RAK-25N5





























Reviews: