Hitachi RAK-18NHA1 Instruction Manual Download Page 11

Page: 11 / 26

– 11 –

ENGLISH

RESET

FAN SPEED (AUTO)

..... When the AUTO fan speed mode is set in the cooling/heating operation:

For the heating operation

●

The fan speed will automatically change according to the temperature
of discharged air.

●

When the difference of room temperature and setting temperature is
large, fan starts to run at HI speed.

●

When the room temperature reaches setting temperature, fan speed
changes to LOW automatically.

●

When the difference of room temperature and setting temperature is
large, fan starts to run at HI speed.

●

After room temperature reaches the preset temperature, the cooling
operation, which changes the fan speed and room temperature to obtain
optimum conditions for natural healthful cooling will be performed.

For the cooling operation

FAN OPERATION

You can use the device simply as an air circulator. Use this function to dry the interior of the indoor
unit at the end of summer.

Press the FUNCTION selector so that the display indicates
(FAN).

Press the (FAN SPEED) button.

Press the (START/STOP) button. Fan operation starts with
a beep. Press the button again to stop operation.

START

STOP

Summary of Contents for RAK-18NHA1



























Search results

Summary of Contents for RAK-18NHA1

Reviews:

Related manuals for RAK-18NHA1

Brands by name

Popular brands

Hitachi RAK-18NHA1, Instruction Manual

Search results

Summary of Contents for RAK-18NHA1

Reviews:

Related manuals for RAK-18NHA1

Brands by name

Popular brands