Hitachi RAF-25RXB, Instruction Manual

Page: 9 / 122

– 9 –
Removing
Press the hook found at the tip of the resin band
installed inside the front panel’s right section to
remove the resin band.
2. HOW TO INSTALL AND REMOVE THE FRONT PANEL
4. MAINTENANCE AT BEGINNING OF LONG OFF PERIOD
dry and prevent mold formation.
Activating air conditioner drying will keep the interior of the indoor unit
Turn off the circuit breaker.
Pull the front panel down toward you and once
fully open, pull it to remove.
Attach three front panel bearings to the axis of
the front cover. (Set the hook to face up.) Insert the tip of the resin band into the hole of the
protrusion inside the right section of the front
panel.
3. CLEANING OF FRONT PANEL
The front panel can be washed in water. It can be kept clean at all times.
front panel using a soft sponge.
Front panel can be removed and washed in water. Gently clean the
Be sure to use both hands to grasp the front panel when removing it or attaching it.
The front panel may be installed up or down to suit user preference.
panel, clean both the body and remote controller with a dry soft cloth.
When the air conditioner is to be cleaned without removing the front
light receiver section, this could cause a malfunction.
Wipe off water completely. If water remains on the display section or
CAUTION
cause short circuit.
Do not splash or direct water to the body of the unit when cleaning it as this may
brush, because it will damage the plastic surface and the coating.
Never clean with hot water (above 40°C), benzine, gasoline, acid, thinner or a
Resin band
Air blow
BENZINE
THINNER
A
C
I
D
Hook
Front cover
Front panel
Resin band
Attaching
1
2
2 1
ENGLISH