– 13 –
∂ÏÏËÓÈο
ENGLISH
SP
ANISH
IT
ALIANO
2
Set the
(TIME) button.
3
Set the current time with
the TIMER control button.
4
Press the
(TIME)
button again. The time
indication star ts lighting
instead of flashing.
The time indication will
disappear automatically in 10
seconds.
To check the current time
setting, press the (TIME)
button twice.
The setting of the current
time is now complete.
AM
PM
PM
PM
Example: The current time is 1:30p.m.
2
Set the turn-off time with
the TIMER control button.
PM
3
Point the signal window of the remote controller toward the indoor unit,
and press the
(RESERVE) button.
The
(OFF) mark starts lighting instead of flashing and the
(RESERVED)
sign lights. A beep occurs and the
(TIMER) lamp lights on the indoor unit.
PM
Example: The device will turn off at 11:00 p.m.
The setting of turn-off time is now complete.
2
Set the turn-on time with
the TIMER control button.
AM
3
Point the signal window of the remote controller toward the indoor unit,
and press the
(RESERVE) button.
The
(ON) mark starts lighting instead of flashing and the
(RESERVED)
sign lights. A beep occurs and the
(TIMER) lamp lights on the indoor unit.
AM
4
Set the turn-on time with
the TIMER control button.
5
Point the signal window of the remote controller toward the indoor unit,
and press the
(RESERVE) button.
The
(ON) mark starts lighting instead of flashing and the
(RESERVED)
sign lights. A beep occurs and the
(TIMER) lamp lights on the indoor unit.
PM
AM
PM
AM
The timer may be used in three ways: off-timer, on-timer and ON/OFF (OFF/ON)-timer. Set the
current time at first because it serves as a reference.
As the time settings are stored in memory in the remote controller, you only have to press the
(RESERVE) button is order to use the same settings next time.
Example:
The device will turn on early so that the preset
temperature be almost reached at 7:00 a.m.
The setting of the turn-on time is now complete.
Example:
For heating, the device will turn off at 10:30 p.m.,
a n d t h e n t u r n o n e a r l y s o t h a t t h e p r e s e t
temperature be almost reached at 7:00 a.m.; for
cooling and dehumidifying, it will simply turned on
at 7:00 a.m. The settings of the turn on/off times
are now complete.