ENGLISH
- 9 -
COOLING OPERATION
Use the device for cooling when the outdoor temperature is to 4 °C.
If humidity is very high (over 80%) indoors, some dew may form on the air outlet grille of the indoor unit.
Press the MODE selector button so that the display indicates
(COOL).
■
As the settings are stored in memory in the remote control, you only
have to press the
(ON/OFF) button next time.
1
2
3
Set the desired FAN SPEED with the (FAN SPEED) button (the
display indicates the setting).
Set the desired room temperature with the TEMPERATURE buttons
(the display indicates the setting).
The temperature setting and the actual room temperature may vary
somewhat depending on conditions.
Press the (ON/OFF) button. Cooling operation starts with a
beep. Press the button again to stop operation. The cooling function
does not start if the temperature setting is higher than the current
room temperature (even though the (OPERATION) lamp lights).
The cooling function will start as soon as you set the temperature
below the current room temperature.
START
STOP
■
During AUTO fan, the fan speed automatically changes as below:
●
When the difference between room temperature and setting tem-
perature is large, fan starts to run at HI speed.
●
After room temperature reaches the preset temperature, fan speed
will be changed to lower speed to obtain optimum room temperature
condition for natural healthy cooling.
(AUTO)
(HIGH)
(MED)
(SILENT)
(LOW)
Temperature range can be set between 16°C and 32°C.
7
3
Sleep
Right/Left
Silent
F.Wash
Sleep
Right/Left
Silent
F.Wash
