– 19 –
ATTACHING THE AIR PURIFYING FILTERS
1
Open the front panel
●
Pull up the front panel by holding it at both sides
with both hands.
2
Remove the Pre-
fi
lter
●
Push upward to release the claws and pull out the
Pre-
fi
lter.
3
Attaching the air purifying
fi
lters
●
Attach the air purifying
fi
lters to the frame by gently
compress its both sides and release after insertion
into Pre-
fi
lter frame.
4
Attach the Pre-
fi
lters
●
Attach the Pre-
fi
lters by ensuring that the surface
written “FRONT” is facing front.
●
After attaching the Pre-
fi
lters, push the front panel at
three arrow portions as shown in
fi
gure and close it.
!
Do not bend the air purifying
fi
lter as it may cause damage
to the structure.
Please do not smell direct from
source of
fi
lter.
NOTE
●
In case of removing the air purifying
fi
lters, please follow the above procedures.
●
The cooling capacity is slightly weakened and the cooling speed becomes slower when the air
purifying
fi
lters are used. So, set the fan speed to "HIGH" when using it in this condition.
●
Air purifying
fi
lters are not washable. It is recommended to use vacuum to clean it. It can be use
for 1 year time. Type number for this air purifying
fi
lter is <SPX-CFH22>. Please use this number
for ordering when you want to renew it.
●
Do not use detergent on the air purifying
fi
lter as some detergent may deteriorate the air purifying
fi
lter electrostatic performance.
CAUTION
RAS-RAC-70-80YHA4 (17-24).indd 19
RAS-RAC-70-80YHA4 (17-24).indd 19
08/09/2016 11:52 AM
08/09/2016 11:52 AM
