manualshive.com logo in svg

Hitachi RAC-50YHA3, Instruction Manual, Page: 4 / 24

Share
Download
Hitachi RAC-50YHA3 Instruction Manual Download Page 4

– 4 –

INDOOR UNIT

NAMES AND FUNCTIONS OF EACH PART

Pre-Filter

To prevent dust from coming into the indoor unit.
(Refer page 20)

Front panel

Indoor unit indicators

Light indicator showing the operating condition.
(Refer page 5)

Horizontal de ector 

●

 Vertical de ector 

(Air Outlet) 

(Refer page 15)

Remote controller

Send out operation signal to the indoor unit. So as to operate 
the whole unit.
(Refer page 6)

WIDTH (mm)

1030

850

850

MODEL

RAS-50YHA3, RAS-60YHA3

RAC-50YHA3

RAC-60YHA3

HEIGHT (mm)

295

650

750

DEPTH (mm)

207

298

298

MODEL NAME AND DIMENSIONS

!

Drain pipe

Condensed water drain to outside.

Connecting cord and insulation pipe for piping

Air inlet 
(Back and Left side)

Air outlet

NOTE

●

  In case of removing the air purifying  lters, please follow the above procedures.

●

 The cooling capacity is slightly weakened and the cooling speed becomes slower when the air purifying  lters are 

used. So, set the fan speed to "HIGH" when using it in this condition.

●

  Air purifying  lters are washable and reusable up to 20 times by using vacumm cleaner or water rinse under running 

tap water. Type number for this air purifying  lter is <SPX-CFH18>. Please use this number for ordering when you 
want to renew it.

●

  Do not operate the air conditioner without  lter. Dust may enter the air conditioner and fault may occur.

OUTDOOR UNIT

Drain pipe

Condensed water drain to outside.

Connecting cord and insulation pipe for piping

Air inlet 
(Back and Left side)

Air outlet

         

CAUTION

●

  When heating operation, drain or 

defrosted water  ows out from 
outdoor unit. Don’t close drain 
outlet portion in chilly area so 
as not to freeze these.

RAC-50YHA3

RAC-60YHA3

RAS-50-60YHA3 (EN1)   4

12/21/11   9:32 AM

Summary of Contents for RAC-50YHA3

























Reviews:

No comments