– 8 –
MANUAL OPERATION [Heating
●
Dehumidify
●
Cooling]
■
Please use under below condition when you want to set the function mode, room temperature and
fan speed by manually.
1
OPERATION MODE SELECTION
●
Every time you press the button, the mode will change as the below
sequence
(Auto)
[
(Heat)
[
(Dry)
[
(Cool)
2
ROOM TEMPERATURE SETTING
Up
Down
●
The cooling operation does not start if the
temperature setting is higher than the current
room temperature.
3
FAN SPEED SETTING
●
Every time you press the button, fan speed will change as the
below sequence.
●
HEATING
: AUTO
[
HIGH
[
MED
[
LOW
COOLING
: (
[
[
[
)
●
DEHUMIDIFYING
: LOW (FIXED)
: ( )
4
Press the (START/STOP) button
●
Operation start with a signal received sound “beep”.
Press the (START/STOP) button
●
As the settings are stored in memory in the remote control unit, you
only have to press the (Start/Stop) button in order to use the
same setting next time.
STOP
HEATING
Outdoor Temperature
21°C below
DEHUMIDIFYING
Room Temperature
16°C above
COOLING
Outdoor Temperature
22°C above
°
C
Heating
20~24°C
Dehumidify
20~26°C
Cooling
25~28°C
■
Recommend Temperature
▲
▲
HITACHI
°
C
HITACHI
°
C
HITACHI
°
C
}
HITACHI
°
C
32CNH2 EN1
3/25/05, 2:30
8
