– 19 –
ENGLISH
ATTACHING THE AIR PURIFYING FILTERS
1
Open the front panel.
●
Pull up the front panel by holding it at both sides with
both hands.
2
Remove the pre-
fi
lter.
●
Push upward to release the claws and pull out the
pre-
fi
lter.
3
Attaching the air purifying
fi
lters to the
fi
lter frame.
●
Attach the air purifying
fi
lters to the frame by gently
compress its both sides and release after insertion into
fi
lter frame.
4
Attach the pre-
fi
lters.
●
Attach the pre-
fi
lters by ensuring that the surface written
“FRONT” is facing front.
●
After attaching the pre-
fi
lters, push the front panel at
three arrow portion as shown in
fi
gure and close it.
Cleaning and maintenance must be carried out only by quali
fi
ed service personal. Before cleaning,
stop operation and switch off the power supply.
CAUTION
CAUTION
Do not bend the air
purifying
fi
lter as it may cause damage to
the structure.
Please do not smell direct from
source of
fi
lter.
NOTE
●
In case of removing the air purifying
fi
lters, please follow the above procedures.
●
The cooling capacity is slightly weakened and the cooling speed becomes slower when the air purifying
fi
lters are used. So, set the fan speed to "HIGH" when using it in this condition.
●
Do not operate the air conditioner without
fi
lter. Dust may enter the air conditioner and fault may
occur.
Claws
(4 places)
30MH1 15-24.pdf 5
2/19/14 11:28 AM
