– 18 –
Removing
1
Press at the top left and right corners of the front
panel.
2. HOW TO INSTALL AND REMOVE THE FRONT PANEL
•
Be sure to use both hands to grasp the front panel when removing it or attaching it.
4. MAINTENANCE AT BEGINNING OF LONG OFF PERIOD
•
Activating air conditioner drying will keep the interior of the indoor unit
dry and prevent mold formation.
•
Turn off the circuit breaker.
2
Grasp the left and right sides of the front panel
and pull it up to remove.
1
Attach three front panel bearings to the axis of
the front cover. (Set the hook to face up.)
2
Close the front panel.
3. CLEANING OF FRONT PANEL
The front panel can be washed in water. It can be kept clean at all times.
•
Front panel can be removed and washed in water. Gently clean the
front panel using a soft sponge.
•
When the air conditioner is to be cleaned without removing the front
panel, clean both the body and remote controller with a dry soft cloth.
•
Wipe off water completely. If water remains on the display section or
light receiver section, this could cause a malfunction.
CAUTION
• Do not splash or direct water to the body of the unit when cleaning it as this may
cause short circuit.
• Never clean with hot water (above 40°C), benzine, gasoline, acid, thinner or a
brush, because it will damage the plastic surface and the coating.
Air blow
BENZINE
THINNER
A
C
I
D
Attaching
5/17/10, 9:37 AM
18
Summary of Contents for RAC-25NXA1
Page 23: ... 2 3 MEMO ...
Page 24: ... 3768 C ...
