– 13 –
ENGLISH
TEMPORARY SWITCH
Use the temporary switch when operation can not be
done with the remote controller.
1. By pressing the temporary switch, the operation is
done in previously set operation mode.
When the operation is done using the temporary
switch after the power source is turned off and is
turned on again, the operation is done in automatic
mode.
2. When the operation is stopped or when the
operation is done with the remote controller again,
press the temporary switch once again.
POWER SWITCH
When you do not use the room air conditioner, set
the power switch to “OFF”.
HOW TO EXCHANGE THE BATTERIES IN THE REMOTE CONTROLLER
1
Remove the cover as shown in the figure and take out the
old batteries.
=
2
Install the new batteries.
The direction of the batteries should match the marks in the
case.
1. Do not use new and old batteries, or different kinds of batteries
together.
2. Take out the batteries when you do not use the remote controller
for 2 or 3 months.
CAUTION
Push and pull to the
direction of arrow
!