ENGLISH
– 17 –
ONCE TIMER (ON/OFF TIMER) OPERATION
OFF TIMER
The device can be set to turn off at a preset time.
1.
Press
(OFF-TIMER) button.
and
blink on the display.
2.
Set the "turn-off time" with
(TIME) button.
3.
After setting, direct the remote controller towards the indoor and press
(SEND) button.
and "set time" lights up instead of blinking.
A beep sound emitted from indoor unit and the (TIMER) lamp on the indoor
unit lights up.
ON TIMER
When (ON TIMER) is set, the operation starts so that the preset temperature is
reached at the preset time.
The air conditioner starts operation a maximum 60 minutes before the preset time,
depending on conditions including room temperature and preset temperature.
1.
Press
(ON-TIMER) button.
and
blink on the display.
2.
Set the "turn-on time" with
(TIME) button.
3.
After setting, direct the remote controller towards the indoor and press
(SEND) button.
and "set time" lights up instead of blinking.
A beep sound emitted from indoor unit and the (TIMER) lamp on the indoor
unit lights up.
ON/OFF TIMER
z
The device will turn on (off) and off (on) at the designated time.
z
The switching occurs first at the preset time that comes earlier.
z
The arrow mark appears on the display to indicate the sequence of switching
operations.
1.
Press
(OFF-TIMER) button so that
and
blink on the display.
2.
Set the "turn-off" time with
(TIME) button. After setting, direct the remote
controller towards the indoor and press
(SEND) button.
3.
Press
(ON-TIMER) button so that
and set "turn-off" time light up.
The
and
blink.
4.
Set the "turn-on" time with
(TIME) button.
5.
After setting, direct the remote controller towards the indoor and press
(SEND) button
and set "turn-on" time light up instead of blinking.
A beep sound emitted from indoor unit and the (TIMER) lamp on the indoor unit
lights up.
The timer may be used in three ways: OFF-timer, ON-timer and ON/OFF (OFF/ON)-
timer. Set the current time first because it serves as a reference.
z
Point the signal window of the remote controller towards the indoor unit and press
(CANCEL) button.
and
"ON or OFF set time" goes out with a beep and the (TIMER) lamp on the indoor unit turns off.
NOTE
z
User can set only one of the OFF-timer, ON-timer or ON/OFF-timer.
z
If WEEKLY TIMER already set, by setting the ONCE TIMER, ONCE TIMER operation is prioritized. When ONCE TIMER
operation is complete, WEEKLY TIMER operation will be activated.
To cancel Reservation
Summary of Contents for RAC-18WSPA
Page 37: ...ENGLISH 11 MEMO ...
Page 38: ... 12 10031C ...
