Hitachi RAC-18CP5, Instruction Manual, Page: 10 / 24

– 10 –
RESET
˚ C
RESET
FAN OPERATION
You can use the device simply as an air circulator. Use this function to dry the interior of the indoor
unit at the end of summer.
Press the (START/STOP) button. Fan operation starts with
a beep. Press the button again to stop operation.
Press the FUNCTION selector so that the display indicates
(FAN).
Press the (FAN SPEED) button.
FAN SPEED (AUTO)
..... When the AUTO fan speed mode is set in Automatic or cooling operation
START
STOP
2
1
CIRCULATION OPERATION
Press the (START/STOP) button. Circulating operation starts
with a beep. Press the button again to stop operation.
Press the FUNCTION selector so that the display indicates
(CIRCULATE).
Press the FAN SPEED button and select the desired FAN
SPEED (the display indicates your choice).
Press the temperature control button to set to the desired
temperature.
■
As the settings are stored in memory in the remote controller,
you only have to press the
(START/STOP) button next time.
START
STOP
2
1
3
●
When the difference of room temperature and setting temperature is large,
fan starts to run at HI speed.
●
After room temperature reaches the preset temperature, the cooling operation,
which changes the fan speed and room temperature to obtain optimum
conditions for natural healthful cooling will be performed.
For the cooling
operation