background image

– 10 –

Press the   (START/STOP) button. Cooling operation starts
with a beep. Press the button again to stop operation. The cooling
function does not start if the temperature setting is higher than
the current room temperature (even though the   (OPERATION)
lamp lights).
The cooling function will start as soon as you set the temperature
below the current room temperature.

START

STOP

COOLING OPERATION

Use the device for cooling when the outdoor temperature is 22-42°C.
If humidity is very high (over 80%) indoors, some dew may form on the air outlet grille of the indoor
unit.

Press the FUNCTION selector so that the display indicates

 (COOL).

1

Set the desired FAN SPEED with the   (FAN SPEED) button
(the display indicates the setting).

 (AUTO)

: The FAN SPEED is HI at first and varies to MED

automatically when the preset temperature has
been reached.

 (HI)

: Economical as the room will become cool quickly.

 (MED)

: Quiet.

 (LOW)

: More quiet.

2

Set the desired room temperature with the TEMPERATURE
buttons (the display indicates the setting).

The temperature setting and the actual room temperature may
vary somewhat depending on conditions.

3

As the settings are stored in memory in the remote controller, you
only have to press the   (START/STOP) button next time.

Summary of Contents for RAC-10SH4





















Reviews: