![Hitachi RAC-07G4 Service Manual Download Page 55](http://html.mh-extra.com/html/hitachi/rac-07g4/rac-07g4_service-manual_139514055.webp)
– 60 –
There is a difference
between the room
temperature setting and
actual room temperature.
Q9
There may be a difference
between the room
temperature setting and
actual room temperature on
account of the room
structure, air flow, etc.
If there is a difference from
the room temperature, adjust
the set temperature to keep
living space at a comfortable
temperature.
A9
Common, etc.
What will happen if the time
setting is changed while in a
timer operation?
Q10
A timer operation is
performed until the time after
changing the time setting.
A10
In the “Automatic fan speed”
mode, the indoor fan
changes to MED and LO fan
speed.
Q11
It is not a trouble. The cold
wind preventive function
operates.
A11
Set the temporary switch
normal.
In case of “ON” timer, the operation does not
start at a preprogrammed time but a little
earlier.
Q12
Nice temperature reservation
The “Nice temperature reservation” functions.
The operation starts earlier so the room
temperature will be as set at a programmed
time.
The operation starts at most 60 minutes before
a preprogrammed time.
A12
The time to start an operation is irregular
while preprogramming at the same time.
Q13
The “Nice temperature reservation” operates.
The starting time depends on the room load.
A13
Summary of Contents for RAC-07G4
Page 35: ... 34 WIRING DIAGRAM MODEL RAS 07G4 09G4 14G4 RAC 07G4 09G4 14G4 TERMINAL BOARD ...
Page 37: ... 37 PRINTED WIRING BOARD LOCATION DIAGRAM MODEL RAS 07G4 09G4 14G4 ...
Page 51: ... 56 PWM output Output voltage Voltage at I Voltage at J Fig 11 2 ...
Page 70: ...PM NO 0198E Printed in Malaysia RAS 07G4 RAC 07G4 RAS 09G4 RAC 09G4 RAS 14G4 RAC 14G4 ...