Hitachi RAC-07CHV1, Service Manual

Page: 10 / 68

NAMES AND FUNCTIONS OF REMOTE CONTROL UNIT
■
This controls the operation function and timer setting of the room air conditioner. The range of
control is about 4 meters. If indoor lighting is controlled electronically, the range of control may be
shorter.
Precautions for Use
●
Do not put the remote controller in direct
sunlight and high temperature.
●
Do not drop it on the floor, and protect
it from water.
●
If you press the FUNCTION selector
button during operation, the air
conditioner may stop for about 3 minutes
for protection before you can start it
again. (unless you turn off and on again
the power source)
You can use the remote controller by fixing it on the
wall with the accessory parts.
●
Before fixing it,
make sure the
unit can be
controlled by the
remote control
unit at the fixing
position.
REMOTE
CONTROLLER
HOLDER
CANCEL Button
Cancel timer reservation.
Signal Transmission
˚
ON/OFF Button
Press this button to start operation.
Press it again to stop operation.
FUNCTION Button
Select the operation mode.
(
Page 12)
DEHUMIDIFY Button
Dehumidify mode direct selection.
(
Page 11)
Reserve Button
Timer setting reservation.
OFF TIMER Button
Select the turn OFF time.
ON TIMER Button
Select the turn ON time.
Transmission Sign
The transmission sign blinks
when a signal has been send.
TEMPERATURE Button
Room temperuture setting.
Value will change more quickly
when keep pressing.
(
Page 12)
FAN SPEED Button
Select the fan speed for
cooling and circulation mode.
(
Page 12)
AUTO SWING Button
Control the angle of the
horizontal air deflector.
(
Page 14)
– 9 –