
– 20 –
ATTACHING THE AIR CLEANSING AND DEODORIZING FILTERS
Open the front panel.
●
Pull up the front panel by holding it at both sides with
both hands.
2
Remove the filter.
●
Push upward to release the claws and pull out the
filter.
3
Attaching the air cleansing and deodorizing filters to
the filter.
●
Attach the air cleansing and deodorizing filters to the
frame by gently compress its both sides and release
after insertion into filter frame.
5
Attach the filters.
●
Attach the filters by ensuring that the surface written
“FRONT” is facing front.
●
After attaching the filters, push the front panel at three
arrow portion as shown in figure and close it.
Cleaning and maintenance must be carried out only by qualified service personal. Before cleaning,
stop operation and switch off the power supply.
CAUTION
!
!
CAUTION
Do not bend the air cleansing and
deodorizing filter as it may cause
damage to the structure.
NOTE
●
In case of removing the air cleansing and deodorizing filters, please follow the above procedures.
●
The cooling capacity is slightly weakened and the cooling speed becomes slower when the air cleansing and deodorizing
filters are used. So, set the fan speed to "HIGH" when using it in this condition.
●
Air cleansing and deodorizing filters are washable and reusable up to 20 times by using vacuum cleaner or water rinse
under running tap water. Type number for this air cleansing filter is <SPX-CFH11>. Please use this number for ordering
when you want to renew it.
●
Do not operate the air conditioner without filter. Dust may enter the air conditioner and fault may occur.
1
4
Attaching the minus ion stick to
the filter frame.
●
Put the minus ion stick to the
lower hooks and install it so as
to push up the upper hooks.
Upper hook
Minus ion stick
Lower hook
Summary of Contents for RAC-07CH5
Page 26: ... 26 MEMO ...
Page 52: ... 52 MEMO ...