Hitachi RA-08JDF2, Operation And Installation Manual

Page: 4 / 36

– 4 –
NAMES AND FUNCTIONS OF REMOTE CONTROL UNIT
■
This controls the operation function and timer setting of the room air conditioner.
The range of control is about 4 meters. If indoor lighting is controlled electronically,
the range of control may be shorter.
Signal Transmission
∞
ON/OFF Button
Press this button to start operation.
Press it again to stop operation.
FUNCTION Button
Select the operation mode.
(
☞
page 7)
SLEEP TIMER Button
Use this button to set the sleep
timer. (
☞
page 6)
RESERVE Button
Timer setting reservation.
OFF TIMER Button
Select the turn OFF timer.
TRANSMISSION Sign
The transmission sign blinks
when a signal has been sent.
TEMPERATURE Button
Room temperature setting.
Value will change quicker when
keep pressing. (
☞
page 7)
FAN SPEED Button
Select the fan speed for cooling
and circulation mode.
(
☞
page 7)
CANCEL Button
Cancel timer reservation.
ON TIMER Button
Select the turn ON timer.
Precautions for Use
● Do not put the remote controller in direct
sunlight and high temperature.
● Do not drop it on the floor, and protect it
from water.
● If you press the FUNCTION selector
button during operation, the air
conditioner may stop for about 3 minutes
for protection before you can start it
again. (unless you turn off and on again
the power source)
You can use the remote controller by fixing it on the wall
with the accessory parts.
● Before fixing it,
make sure the
unit can be
controlled by the
remote control
unit at the fixing
position. HOLDER
REMOTE
CONTROLLER
BATTERIES INSTALLATION
● The direction of batteries must match the mark in the case.
●
Do not mix use the old and new or different kinds of batteries together.
●
Take out the batteries when you do not use it for more than one month.
CAUTION
Slightly push
and slide out
the cover.
■
BATTERIES
● Please use AAA type of batteries.
● Life of batteries is about 1 year for normal usage.
● Replace the batteries when the lighting of LCD becomes dim.
● After replace the batteries and if operation is abnormal, take
out the batteries and install again after 5 seconds.