Hitachi RA-08HDF, Operation And Installation Manual

Page: 9 / 36

– 9 –
OFF TIME setting
●
Select the OFF TIME by pressing the
(OFF) button.
●
Setting time will change according to the below
sequence when you press the button.
0.5 hour interval 1 hour interval
●
The value change more quickly if you keep pressing
the button.
Press the (Reserve) button
●
OFF TIMER reserved with a signal received
sound “beep”.
●
The (OFF) Mark starts lighting instead of
blinking.
1
OFF Timer Reservation
2
ON TIME setting
● Select the ON TIME by pressing the (ON)
button.
● At the beginning of setting, time 6 hours was set.
●
Setting time will change according to the below
sequence.
0.5 hour interval 1 hour interval
●
The value change more quickly if you keep pressing
the button.
Press the (Reserve) button
●
ON TIMER reserved with a signal received
sound “beep”.
●
The (ON) Mark starts lighting instead of blinking.
1
2
ON Timer Reservation
1
Press the (Cancel) button
●
As the time settings are stored in remote controller
memory, you only have to press the
(Reserve)
button in order to use the same setting next time.
CANCELLATION of Timer Reservation
■
Operation stop at setting time
■
ON Timer and OFF Timer are available.
TIMER RESERVATION
■
Operation will star t for setting
temperature at setting time (The starting
time may different depend on the room
temperature and set temperature).
RA-08HDF/JDF_EN(OI) 13/01/2004, 04:06 pm 9