Hitachi R-SG38FPH, Instruction Manual

Page: 7 / 17

Caution
Light ON
6. Tank Empty
7
Notice
7. Adjusting temperature in a refrigerator compartment
Touch button on the Open Button to turn on the indicator lamp
1
2
All indicator lamps turn on, and then the current settings are displayed.
Touch button to set the temperature as you like.
Each time you touch the button, the corresponding indicator lamp changes
in the order shown in the figure on the right.
The temperature is set to “ Mid ” before shipping.
Select “ Mid ” in ordinary usage. The temperature may change
depending on the operation states.
The above temperatures are standard values in the
Refrigerator Compartment under the condition that the
refrigerator is stable with no food stored and the door
closed, at ambient temperatures of 32ºC.
8. Adjusting temperature in a freezer compartment
Touch button on the Open Button to turn on the indicator lamp
1
2
All indicator lamps turn on, and then the current settings are displayed.
Touch button to set the temperature as you like.
Each time you touch the button, the corresponding indicator lamp changes
in the order shown in the figure on the right.
The temperature is set to “ Mid ” before shipping.
Select “ Mid ” in ordinary usage. The temperature may change
depending on the operation states.
Notice
If operating the refrigerator for a long time with the Freezer
Compartment “Max” selected, ice cream etc. may become
hard or it may take a longer time to thaw food.
Notice: For the Freezer Compartment ( “Max”Lower temperature freezer),
food is stored at a lower temperature than the conventional
freezer temperature. The energy consumption is approximately 20%
higher than that for the conventional freezer operation.
“ Tank Empty ” may come on regardless of water level if the
water tank is not placed properly. Push in the water tank straight and
completely if the indicator lamp comes on.
“Tank Empty” indicator lamp remains off when “OFF” is selected for automatic ice making.
“ Tank Empty ” indicator lamp turns comes on when water in water tank is getting low
Replenish the water tank with water. While the “Tank Empty” indicator lamp is on, the Ice Making function
“
Tank Empty
” indicator lamp turns off once (for up to 3 hours) when the left door
of the Refrigerator Compartment is opened and closed while the indicator
lamp is on, and it turns on again if no water is added to replenish the water tank
About 2
〜
5˚C
(Factory setting)
About 1
〜
3˚C
lower than “ Mid ”
About 1
〜
3˚C
higher than “ Mid ”
About -20
〜
-18˚C
(Factory setting)
About 1
〜
3˚C
lower than “ Mid ”
About 1 〜 3˚C
higher than “ Mid ”
doesn’t work even if the “ON” is set.