63
Maintenance
(Continued)
Ice tray
Once or twice a year
Touch
button on the Control Panel to turn on
the indicator lamp.
All indicator lamps turn on, and then the current settings are displayed.
Touch
button to turn on “Off” indicator lamp.
It stops water supply to the ice tray.
※
When “Off” indicator lamp blinks, wait for about 1 minute for it to turn on, and then follow the next
steps.
Note that the frame cannot be pulled out.
Open the door of the Ice Compartment, and take out the ice tray.
Push the level laterally. draw the frame.
Raise the cover (
▲
part) in the direction of the arrow.
Remove the ice tray from the frame.
Push the level laterally. draw the frame.
Raise the cover (
▲
part) in the direction of the arrow.
Remove the ice tray from the frame.
Empty the ice tray and wash it lightly in the stream.
Do not use a sponge / cleanser, etc.
Be sure not to scarify.
Open the Ice Compartment, and then attach the ice tray.
Set the ice tray
Hold down the cover to the end until it snaps.
Push the frame to the end until it snaps.
Move the frame back and forth to check that it is fixed securely.
Set the ice tray and
close the cover.
Make the frame horizontal and push it into the end, and
Pull up the lever.
(Move the frame back and forth to check that it is fixed securely.)
Touch
button on the Control Panel to turn on the
indicator lamp, and then touch
button to turn on the
“On” indicator lamp.
Automatic Ice Making starts.
1
3
4
5
6
2
●
When the frame for the ice tray cannot be pushed into the back, the motor that drives the ice-tray may have operated. Remove
the ice tray once and then push the frame alone into the back, and then touch
button with all the doors closed to turn on
“Off” . After 1 minute, the ice-tray driving motor gets ready, allowing you to mount the ice-tray.
Notice
Ice tray
Cover
Frame
Lever
Click
Click
Touch it
Touch it
Slide
R-G500G type
R-G500G type
R-G420G type
R-G420G type
Ice tray
Cover
Frame
Lever
Click
Click
Is the lever in
horizontal state?
Horizontal
