English
10
CHARGING
For rechargeable batteries, please charge in according to the
handling instructions of the charger which you are using. (
Fig. 5
)
PRIOR TO OPERATION
1. Setting up and checking the work environment
Check if the work environment is suitable by following the precautions.
2. Mounting and dismounting the
fi
lter and pre
fi
lter
Before using the appliance, check that the
fi
lter is securely mounted.
(1) Remove the dust case (
Fig. 6
)
Looking at the dust case from the inlet port, turn it counterclockwise for approximately
120 degrees to align the protruding marks on the dust case and the housing, and then
pull it o
ff
.
(2) Remove the pre
fi
lter. (
Fig. 7
)
Turn the pre
fi
lter clockwise to remove it from the housing.
(3) Check the
fi
lter (
Fig. 8
)
After removing the pre
fi
lter, check to see if the
fi
lter is installed.
Also, check to see if the edges of the
fi
lter are turned up or not.
NOTE
If
the
fi
lter is not properly
fi
tted, dirt or grime can enter the fan unit and cause damage or
malfunction.
Battery
Charger
Fig. 5
Fig. 6
Remove
Tighten
Protruding marks
Dust Case
Inlet Port
Housing
Fig. 8
Pre Filter
Filter
Fig. 7
Hold here
1
Turn clockwise
2
Remove
Housing
Pre Filter
000Book̲R18DSAL̲ChS.indb 10
000Book̲R18DSAL̲ChS.indb 10
2017/04/28 9:41:31
2017/04/28 9:41:31
