OPTIONAL SETTING AND INPUT/OUTPUT SETTING OF INDOOR UNIT
5
/
9
EN
G
L
IS
H
5.
OPTIONAL SETTING AND INPUT/OUTPUT SETTING OF INDOOR UNIT
5.1.
OPTIONAL SETTING MODE
5.2.
SELECTION OF INDOOR UNIT
Normal Mode (When unit is not operating)
Press the “CHECK” switch and the ”RESET”
switch simultaneously more than 3 seconds.
Change to the optional setting mode.
Press the “
” or “
” switch and set “01” or “02”.
Then press the “CHECK” switch.
Selection of Optional Setting Mode
COOL
SERVICE
°°°°
C
HIGH
A/C
SET TEMP
“SERVICE” is indicated and the mode number is flickered.
The address of the indoor unit
(ADDS) to set and the refrigerant
cycle number (RN) are indicated
by 0 15. (The left figure shows
the No.1 cycle and No.1 indoor
unit.)
NOTE:
1. In case that the both indications of the “ADDS.” and “RN” show
“AA”, the same setting is performed to all the indoor units.
2. The address of indoor unit not connected is not indicated.
Selection of Indoor Unit for Optional Setting
“01” or “02” flickers.
Select the indoor unit to set by
pressing the “
” or “
” switch
and press the “CHECK” switch.
<Example>
When selecting No.2 cycle and
No.3 indoor unit
COOL
SERVICE
HIGH
A/C
ADDS. RN
SERVICE
COOL
HIGH
A/C
•
#
ADDS. RN
•
#
