Hitachi PC-ARF1 Operation Manual Download Page 40

Page: 40 / 48

P5417005

8.19 Power Consumption Display

This function displays the power consumption of

the outdoor unit compressor.

The value of each displayed in Graph/List format is

1 day (24h (- every 2 hrs.)), 1 week (7 days), and 1

year (12 months).

• Depending on the type and setting of the indoor

unit and outdoor unit it may be impossible to set

this function.

NOTE:

• The numerical value is a reference. Do not use

this unit for the following:

Calculation of power rates or examination of the

power contract.

• The “Main/Sub-Remote” display in the “Current

Setting” of the “Help Menu” cannot be set if “Sub”

or “−−”.

• In the following instances, the calculated value

may be a deficit or may be changed.
- Power Failure (outdoor unit, indoor unit, wired

controller)

- Communication Failure (outdoor unit ↔ indoor

unit ↔ wired controller)

- Modification of time

(1) Select “Usage Amount Display” from the

“Menu” and press “OK”.

The Usage Amount Display setting screen

will be displayed. When the current time

is not set, the time adjusting screen will be

automatically displayed.

(2) The confirmation screen will be displayed.

Press “OK” to change the screen to “Power

Consumption” display.

(3) Display Period

Press “OK” to change the Display Period

as follows :

1 day (24h) / 1 Week (7 days) /

1 year (12 months)

Comparison

Press “

” or “ ” to change the periods of

comparison as follows:

“2 days before / 1 day before”

↕

“1 day before / Today”
“2 weeks ago / 1 week ago”

↕

“1 week ago / This week”
“2 years ago / 1 year ago”

↕

“1 year ago / This year”

ECO

Back/Help

ECO

Back/Help

Summary of Contents for PC-ARF1

















































Search results

Summary of Contents for PC-ARF1

Reviews:

Brands by name

Popular brands

Hitachi PC-ARF1, Operation Manual

Search results

Summary of Contents for PC-ARF1

Reviews:

Brands by name

Popular brands