12
5. Install the wireless receiver kit onto the wall or ceiling as
follows:
A. In Case of Exposing Cable
Fix the fixing bracket of kit by using screw (A)
at 4 locations
Screw (A)
Cut one of the knockout holes (*) at the cover.
Lead the cable through the groove and draw
out the cable from the knockout hole.
Attach the cover. Do not clamp the cable when
attaching the cover.
Cover
Hooking part
Click sound
Fixing bracket
B. In Case of Concealed Cable
Prepare the following box. (Field-Supplied)
JIS Box (JIS C 8336-1991)
a. Switch Box for 1 Controller
(without cover)
b. Small Switch Box for 1
Controller (without cover)
c. Switch Box for 1 Controller
(with cover)
Rigid Metal Conduit (More than Ø20)
Screw (M4) (Field-Supplied)
Insert the cable into the rigid metal conduit.
Cable
Fix the fixing bracket of kit by using screw
(Field-Supplied).
This figure shows the case of Switch Box for 1
Controller.
Cable
Screws
(field-supplied)
Attach the cover same as A
.
−
−
INSTALLATION OF WIRELESS RECEIVER KIT
PMML0174A_r0_11-07.indb 12
22/11/2007 12:49:41
