15
QM00612-1
This projector is equipped with NETWORK BRIDGE function.
When the projector connects to the computer by LAN communication, an external
device that is connected with this projector by RS-232C communication can be
controlled from the computer as a network terminal.
For details, see the
1.5 Network Bridge Function - Network Guide.
Network Bridge Communication
Network Bridge Communication
CONTROL
RS-232C
LAN
LAN
Connection
1.
If you use wired LAN, connect the computer's LAN port and the projector's
LAN
port with a LAN cable. Use the cable that fulfills the specification shown
in figure. If you use wireless LAN, insert the USB wireless adapter into the
projector's
USB TYPE A
port.
2.
Connect the projector's
CONTROL
port and the RS-232C port of the
devices that you want to control with a RS-232C cable.
3.
Turn the computer on, and after the computer has started up turn the projector
on.
4.
Set the COMMUNICATION TYPE to NETWORK BRIDGE
. (
&
OPTION menu -
SERVICE - COMMUNICATION in the User's Manual - Operating Guide
)
NOTE
• If data is transferred via wireless and wired LAN at the same time,
the projector may not be able to process the data correctly.