10
Preparing for the remote control
Please insert the batteries into the remote control before using it. If the remote
control starts to malfunction, try to replace the batteries. If you will not use the
remote control for long period, remove the batteries from the remote control and
store them in a safe place.
1.
Remove the battery cover.
2.
Align and insert the two AA batteries (
Use the appropriate
AA carbon-zinc or alkaline batteries (non-rechargeable) in
accordance with laws and regulations.
) according to their
plus and minus terminals as indicated in the remote control.
3.
Put the battery cover back to the former state.
7U\FKDQJLQJWKHEDWWHULHVZKHQWKHUHPRWH
control malfunctions.
7KLVUHPRWHFRQWUROZRUNVZLWKWKHUHPRWH
sensors on the projector using infrared light
(Class 1 LED). The active sensor senses
the remote control signal assigned within 60
degrees to right and left, and within 3 meters.
)RUGHWDLOVVHHWKH
"
Operating Guide".
3UHYHQWWKHUHPRWHVHQVRUVIURPEHLQJKLWE\
a strong ray. It may cause malfunction of the
projector and remote control.
NOTE
WARNING
Ź)RUSUHFDXWLRQVRQEDWWHU\KDQGOLQJUHIHUWRWKHQH[WSDJH
Remote sensor
3m
(approx.)
30° 30°
Summary of Contents for LP-TW34001
Page 22: ......