Hitachi LE42EC05AUS, User Manual, Page: 20 / 37

20
Menu Operation
Picture Menu
Selected Items Setup Hints
Picture Mode Dynamic Select the most suitable picture mode according to
your lighting condition.
s
The default factory setting for “ Picture Mode ” is
“ Dynamic ”. page 26 to restore all settings to the
default factory settings.
Natural
Cinema
Favourite
Brightness * Adjust to brighten or darken the picture.
Contrast * Adjust to increase or decrease the picture contrast.
Colour * Adjust to increase or decrease the colour intensity.
Tint * Adjust to obtain natural skin colour.
s
“ Tint ” can only be selected and adjusted when
receiving NTSC signal.
Sharpness * Adjust to sharpen or soften the picture.
Colour Temperature Cool Select the most suitable settings depending on your
preferred colour tone.
Normal
Warm
Favourite Red **
Green **
Blue **
Picture Size Full Select the desired picture size.
CAUTION
s
When displaying the image in “ 4:3 ” Picture Size for a
long time, it can cause a permanent after-image on
the TV screen.
s
In PC mode, only “ 4:3 ” and “ Full ” are available for
“ Picture Size ”.
s
If Wide Screen Signalling (WSS) is not transmitted
and detected, TV will automatically set Picture Size
as “
Full ”.
4:3
Auto
Panoramic
Cinema
Zoom
DNR
(Digital Noise Reduction) Off Set to reduce noise in the picture due to weak
signal condition.
Low
Middle
High
s
Menu items that are not selectable are grayed out.
s
The menu items indicated by “ * ” are only available when “ Picture Mode ” is set to “ Favourite ”.
s
The menu items indicated by “ ** ” are only available when “ Colour Temperature ” is set to “ Favourite ”.
s
“ Picture Size ” is not available in MEDIA mode.
s
“ Colour ”, “ Sharpness ” and “ DNR ” are not available in RGB mode.
LE42EC05AUS LE50EC05AU UM (EN) [12_0613].indd 20 6/13/2012 10:45:44 AM