Hitachi LE40TF07A, Service Manual

Page: 9 / 41

Connecting Antenna Cable
Connect the 75 ohm coaxial cable (commercially available) to the antenna input terminal.
To obtain better picture quality, use an outdoor antenna.
If your outdoor antenna uses 75 ohm coaxial cable with an F-type connector, connect it directly to the antenna input
terminal at the rear panel.
If your outdoor antenna uses flat cable, connect it with a 75 ohm adapter (commercially available) and then to the
antenna input terminal at the rear panel.
Connecting External Equipment
You can select the appropriate connection depending on the equipment that you are connecting and the
level of picture quality you are trying to achieve. To view external source images, press to select input
source.
To use HDMI terminal
(rear) (top side) (bottom side) (rear) (top s
HDMI Device
HDMI OUT
or
If the external equipment has DVI output, you can connect it to the HDMI terminal using a HDMI-DVI
cable. In case of using the HDMI-DVI cable, connect analog audio signal to PC audio input terminal.
(rear) (top side) (bottom side) (rear ) (top s
or
DVI Device
AUDIO
OUT
L
R
DVI OUT
The HDMI cable connector should
not exceed 20mm in width (W) and
10mm in height (H).
W
H
CAUTION
The main power plug is used as
the disconnecting device.
Connections
- 9 -