Hitachi LE40K507, Owner'S Manual

Page: 26 / 44

EN
26
To connect the TV to a HDMI or a DVI device to the
TV
The HDMI/DVI input receives digital audio and video from an HDMI device or digital video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only the video signal. Separate analog audio cables are
needed for audio when using a DVI source device.
Connections to other equipment (continued)
To connect the TV to a PC (Personal Computer)
BEFORE YOU CONNECT THIS TV TO YOUR PC, CHANGE THE ADJUSTMENT OF YOUR PC’S RESOLUTION AND REFRESH
RATE (60 HZ).
Connect one end of a (male to male) VGA cable to the video cable of the computer and the other end to the VGA connector PC
MONITOR IN on the rear of the TV. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect
the audio cable to the audio output of your Multimedia computer and to the PC Audio In jack of the TV. You can also connect the PC with
HDMI cable. If you use HDMI cable, you don’t have to connect the audio cable. If you use DVI-to-HDMI cable, please connect audio
cable as same way as VGA cable.
Press INPUT on the remote control to select PC Input.
Switch on the computer. The TV can operate as the computer monitor.
NOTE:
• The on-screen displays will have a different appearance in PC mode than in TV mode.
• If there is no video signal from the PC when the unit is in PC mode, “No Signal” will appear on the TV-screen.
• When the PC’s resolution is set to 1920 x 1080/60 Hz (FHD mode), a signal that differs from the FHD signal, which has been confirmed
operational on this TV, may appear depending on the PC used. In this case, “Auto” adjust or other position adjustment functions may
fail to correct the image position. To solve this problem, change the PC settings to select another resolution.
Left of the TV
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
HDMI cable (type A connector)
(not supplied)
To HDMI output
HDMI device
DVI device
To HDMI/DVI IN
or
Audio cable (not supplied)
To AUDIO IN
To DVI output
Monitor Display modes
Mode Resolution Refresh rate
VGA 640x480 60/ 75 Hz
VGA 720x400 70Hz
SVGA 800x600 60/ 75 Hz
XGA 1024x768 60/ 70/ 75 Hz
WXGA 1280x720 60Hz
WXGA 1360x768 60Hz
SXGA 1280x1024 60Hz
WXGA+ 1440x900 60Hz
WSXGA+ 1680x1050 60Hz
FHD 1920x1080 60Hz
Left of the TV
PC
PC/DVI
AUDIO
VGA cable (not supplied)
To PC
MONITOR IN
To AUDIO IN
Audio cable (not supplied)
NOTE:
• HDMI input audio does not support DTS audio.
HDMI1
/DVI
HDMI2
/MHL
HDMI3
(ARC)
PC
PC/DVI
AUDIO