EN
14
CH
/
Press and release
CH /
. The TV automatically stops at the
next channel.
For proper operation, before selecting channels, they should be
set into the memory. See “Channels setup” on page 18.
INFO
Press
INFO
to display the current information on the screen.
When the TV receives a digital signal, the digital information will
appear.
• Channel number
• DTV Signal condition
• Channel label (if preset)
• Broadcast program name
• Parental Control
• Signal Type
• Program guide
• Current date and time
• Resolution
• Audio language
Press
INFO
again to clear the display.
LAST CH
This button allows you to go back to the last channel selected by
pressing
LAST CH
. Press
LAST CH
again to return to the channel
you were watching.
MUTE
Press
MUTE
to switch off the sound. The TV’s sound will be
silenced and MUTE icon will appear on the screen. The sound can
be switched back on by pressing this button again or by pressing
the
VOL (VOLUME ) +
or
–
buttons.
SLEEP
To set the TV to turn off automatically after a preset amount of
time, press
SLEEP
on the remote control. The clock will change
for each press of the
SLEEP
button (Off, 5 min, 10 min, ..., 240
min).
To confirm the sleep timer setting, press
SLEEP
and the remaining
time will be displayed for a few seconds. To cancel the sleep timer,
press
SLEEP
repeatedly until the display turns to Off.
Quick guide for menu
operation
Example: Select Menu Language.
1
Press
INPUT
to select TV mode.
2
Press
MENU
. The TV menu screen will appear.
Setup
Closed Caption
Time
Menu Language
PC Settings
User Reset
Film Mode
English
Auto
3
Press ◀ or ▶ to select “Setup”, then press ▼.
4
Press ▲ or ▼ to select “Menu Language”, then press ◀ or ▶
to select the desired language.
5
Press
EXIT
to return to the normal screen.
NOTE:
• On the following pages, the menu can be called in the same way
described above, by pressing the
MENU
button.
• If no buttons are pressed for about 10 seconds, the TV will
return to normal viewing automatically.
• During TV or external input mode (except PC input mode), if
there is no signal reception, the TV will change to standby after
approx. 15 minutes (in PC input mode: 1 minute).
