Once the TV has found all your local stations, they are then automatically assigned a
programme numberand name, if available from the broadcast.
If you would like to change the programme number or order, please refer to the Program Menu
section of the instruction book.
important note before starting Auto Setup
important note.
start A.P.S. (Auto Programming System)
If you have a Video Cassette Recorder or a Satellite receiver connected to your TV please
ensure that they are switched on before automatic tuning begins. In the case of a VCR, insert a
pre-recorded tape and begin playback of your equipment. These measures ensure that all your
external equipment is tuned in during the Auto Setup procedure.
When the TV is turned on for the first time, it is in the digital mode.
Because this is the first time the TV is used, there are no channels stored
in the memory and the following message appears on the screen.
1
2
3
5
After APS is finalized, the programme table will appear on the screen. In the
programme list you will see the programme numbers and names assigned to
the programmes.
4
To start installation process, select
“Yes”,
to cancel select
“No”.
This process
will take about five minutes. To cancel searching, you can press “ ” button at
any time during the process.
After
Automatic Search
process is completed, a message asking for
analogue channel search appears on the screen. To continue Auto Program,
first set the language, country and teletext language by using
|
/
}
button and
then press the RED or “
OK
” button
For details, please refer to the
Install Menu
section of the instruction book.
Please ensure aerial is plugged in. Do you
want to start first time installation?
Yes
No
MENU
BBC ONE
BBC TWO
BBC CHOICE
Searching UHF channels 30. Please wait. This will take a few minutes
Cancel searching
AUTOMATIC SEARCH
Channels:
12 %
Language English
AUTO PROGRAM
Country UK
Text language West
APS is running...
Cancel
