English
- 11 -
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources.
• Press
SOURCE
button on your remote control for
directly changing sources.
or
• Select “
Source
” option from the main menu
by using “ ” or “ ” button. Use then “
” or
“
” button to highlight an input and press “ ” button
to select.
Note : You can mark desired source options by pressing the
OK button. Therefore, when
SOURCE
button is pressed,
only the marked source options will be available (except for
the TV source).
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
• Press “
” button to decrease volume or
button to increase volume, so a volume level scale (slider)
will be displayed on the screen.
Programme Selection
• Press “
P/CH +
” button to select the next programme or “
P/
CH -
” button to select the previous programme.
Viewing Main Menu
•
Press
“
”/ “
”
buttons at the same time to view
main menu.
In the Main menu select sub-menu using “
P/
CH -
” or “
P/CH +
” buttons and enter the sub-menu using
“
” or “
” buttons. To learn the usage of the
menus, refer to the menu system sections.
AV Mode
• Press the “
TV/AV
” button in the control panel on the TV
to switch between AV modes.
Operation with the Remote Control
• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
• Functions of the menu system are described in the
following sections.
Volume Setting
• Press “
” button to increase the volume. Press
“
”
button to decrease the volume. A volume
level scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press “
P -
” button to select the previous programme.
• Press “
P +
” button to select the next programme.
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to select
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between 10-500 (for IDTV) or 10-199 (for analogue),
press the numeric buttons consecutively
• Press directly the programme number to reselect
single digit programmes
Initial Settings
When the TV is turned on for the fi rst time, the menu
for the language selection appears on the screen. The
message “Welcome please select your language!”
is displayed in all language options sequentially in
the OSD.
By pressing the “
” or “
” buttons highlight the
language you want to set and press OK button. After
then, “First time installation” OSD will appear on the
screen. By pressing “ ” or “ ” buttons, select the
country you want to set and press OK button (* for
EU countries).
Note: Country selection OSD will not be available for UK.
Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
• To select the “Yes” or “No” option, highlight the item
by using “ ” or “ ” buttons and press the “
OK
”
button.
The IDTV will automatically tune to the UHF or VHF(*)
(
*For EU countries except UK
) transmission channels,
searching for digital terrestrial TV broadcasts and
displaying the names of channels found. This process
will take about a few minutes.
00_MB45M_[GB]_1800UK_IDTV_NICKEL13_32860W_(Power save mode)_10070715_50178481.indd 11
00_MB45M_[GB]_1800UK_IDTV_NICKEL13_32860W_(Power save mode)_10070715_50178481.indd 11
19.10.2010 13:45:13
19.10.2010 13:45:13
