- 16 -
Installation
The Installation menu mainly intends to help you for
building a
Channel Table
in the most efficient way.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
This menu includes the following items:
1. Add New Channels
2. First Time Installation.
ADD NEW CHANNELS:
This tuning menu consists of two parts:
x
Automatic Search
x
Manual Search
Installation
Add New Channels
First Time Installation
Automatic Search
Manual Search
Automatic Search
Automatic search is started by pressing the
OK
but-
ton in the auto-search pop up menu. All the services
are searched and a channel table is created auto-
matically.
All channels found are stored in a sorted form with
respect to their channel numbers. Some services
may not appear with the correct channel number. At
the time of printing, not all broadcasters are sending
their channel number information.
Manual Search
In manual search, the number of the multiplex is en-
tered manually and only that multiplex is searched for
the channels. For every valid channel number, signal
level, signal quality and network name are shown at
the bottom of the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
FIRST TIME INSTALLATION
The user can use this item to load default settings,
which had been loaded to the receiver at the factory.
To install factory settings, highlight
“First Time In-
stallation”
menu and press the
OK
button, then you
will be asked to confirm for deleting all channels and
settings.
Installation
Add New Channels
First Time Installation
Your previous digital channel list will be destroyed.
Are you sure you want to delete all digital channels
and settings for first time installation?
Yes
No
By selecting YES and pressing the
OK
button, the
existing channel table will be deleted.
After factory settings is loaded, “
First Time Instal-
lation
” menu will be displayed.
Please ensure aerial is plugged in. Do you
want to start first time installation?
Yes
No
Press the
OK
button to start installation. After search
is completed for digital channels, a message asking
search for analogue channels appears on the screen.
Yes
Do you want to search for
analogue channels?
No
Press the
OK
button to search for analogue
channels.The following menu appears on the screen
for analogue channel search.
Country
Language
UK
Ok
Cancel
PLEASE CHECK ANTENNA CABLE
AUTO PROGRAMMING SYSTEM
TXT Language
Auto Program
