Hitachi L22HP04U Instructions For Use Manual Download | Manualshive

Page: 8 / 36

background image

English

- 7 -

Viewing the Connections - Side Connectors

CI Slot is used for inserting a CI card. A CI card allows you to view all the

1.

channels that you subscribe to. For more information, see “Conditional
Access” section.

Video Input is used for connecting video signals of external devices.Connect

2.

the video cable between the VIDEO IN socket on the TV and the VIDEO
OUT jack on your device.

Audio Inputs are used for connecting audio signals of external devices.

3.

Connect the audio cable between the AUDIO INPUTS on the TV and the
AUDIO OUTPUT jacks on your device.
Also to enable PC/YPbPr sound connection in such a case, use an
appropriate audio cable between the connected device’s audio outputs and
the TV’s audio inputs
Note: If you connect a device to the TV via the VIDEO or PC/YPbPr cable
(YPbPr cable is not supplied) you should also connect your device with an
audio cable to the AUDIO INPUTS of the TV to enable audio.

Headphone jack is used for connecting an external headphone to the system.

4.

Connect to the HEADPHONE jack to listen to the TV from headphones.

Power Connection

IMPORTANT

: The TV set is designed to operate on 220-240V AC, 50 Hz.

• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the

mains.

• Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

HDMI

«
...
6
7
8
9
10
...
»

Summary of Contents for L22HP04U





































Reviews:

No comments

Related manuals for L22HP04U

Brand: Zenith Pages: 60

Brand: Zenith Pages: 32

Brand: Zenith Pages: 52

Brand: Zenith Pages: 52

Brand: Zenith Pages: 40

Brand: HANNspree Pages: 1

Brand: Sylvania Pages: 80

Brand: Magnavox Pages: 8

Brand: Finlux Pages: 91

Brand: Zenith Pages: 37

Brand: Kalley Pages: 41

Brand: VESTEL Pages: 75

Brand: Palsonic Pages: 26

Brand: Fisher Pages: 48

Brand: Salora Pages: 127

Brand: Element Pages: 27

Brand: Daewoo Pages: 47

Brand: QFX Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands