English
- 19 -
Input Selection
Once you have connected external systems
to your TV, you can switch to different input
sources.
• Press
SOURCE
button on your remote control
for directly changing sources.
or,
• Select “
Source
” option from the main menu
by using “ ” or “ ” button. Use then “ ” or
“ ” button to highlight an input and press “
” button to select.
Note
: You can mark desired source options by
pressing the
OK
button. Therefore, when
SOURCE
button is pressed, only the marked source options will
be available (except for the TV source).
Basic Operations
You can operate your TV using both the
remote control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
• Press “
” button to decrease volume
or “
” button to increase volume, so a
volume level scale (slider) will be displayed
on the screen.
Programme Selection
• Press “
P/CH +
” button to select the next
programme or “
P/CH -
” button to select the
previous programme.
Viewing Main Menu
• Press “
” / “
” buttons at the same
time to view main menu. In the Main menu
select sub-menu using “
P/CH -
” or “
P/CH +
”
buttons and enter the sub-menu using “
” or “
” buttons. To learn the usage of the
menus, refer to the menu system sections.
AV Mode
• Press the “
TV/AV
” button in the control panel
on the TV to switch between AV modes.
Operation with the Remote Control
• The remote control of your TV is designed
to control all the functions of the model you
selected. The functions will be described in
accordance with the menu system of your
TV.
• Functions of the menu system are described
in the following sections.
Volume Setting
• Press
V+
button to increase the volume. Press
V-
button to decrease the volume. A volume
level scale (slider) will be displayed on the
screen.
Programme Selection (Previous or Next
Programme)
• Press “
P -
” button to select the previous
programme.
• Press “
P +
” button to select the next
programme.
Programme Selection (Direct Access)
• Press numeric buttons on the remote control
to select programmes between 0 and 9. The
TV will switch to the selected programme.
To select programmes between 10 - 299
(for IDTV) or 10-199 (for analogue), press
the numeric buttons consecutively (e.g. for
programme 27, first press 2 and then 7).
When the pressing time is due for the second
numeric button, only the
fi
rst digit programme
will be displayed. The limit of the delay time
is 3 seconds.
• Press directly the programme number to
reselect single digit programmes.
MB25 [GB] (01-TV)_22856W_1900UK_IDTV_NICKEL5_rocker_10063498_50150822.indd 19
MB25 [GB] (01-TV)_22856W_1900UK_IDTV_NICKEL5_rocker_10063498_50150822.indd 19
25.06.2009 10:44:19
25.06.2009 10:44:19
