Hitachi KP-DE500, Operation Manual

Page: 17 / 21

･
MANUAL (preset white balance)
1) Use the UP and DOWN buttons to shift the cursor to
“R-GAIN” or “B-GAIN”, then press the SET button.
The adjustment value at the right of value flashes.
2) Change the “R-GAIN” or “B-GAIN” by pressing the UP and
DOWN buttons. (Variable range: -128 〜 000 〜 +127)
3) Return the factory setting(000) by simultaneously pressing
the UP and DOWN buttons for two seconds.
4) The setting is fixed when the SET button is pushed, and the
cursor moves below by one line.
WHITE BALANCE MENU (MODE: MANUAL)
◆ ＷＨＩＴＥ ＢＡＬＡＮＣＥ ＭＥＮＵ ◆
>
ＭＯＤＥ ：ＭＡＮＵＡＬ
Ｒ−ＧＡＩＮ ： ０００
Ｂ−ＧＡＩＮ ： ０００
ＲＥＴ
ＥＮＤ
…… Select White Balance mode
……
Adjustment of the R gain
…… Adjustment of the B gain
……
Return to the main menu
……
End of menu display
The sub menu is used for changing the picture quality
(video response) of the camera output image.
1) Press the SET button for longer than 2 seconds to display
the “MAIN MENU”.
2) Use the UP and DOWN buttons to shift the cursor to
“SUB MENU”, then press the SET button to display the
“SUB MENU”.
･
CHROMA [Only KP-DE500 Type]
The optimum color level has been set at the factory. If necessary,
this can be changed as follows.
1) Use the UP and DOWN buttons to shift the cursor to
“CHROMA”, then press the SET button. The adjustment
value at the right of value flashes.
Sub Menu
2) Change the “CHROMA” by pressing the UP and DOWN
buttons. (Variable range: -128
〜
000
〜
+50)
3) Return the factory setting(000) by simultaneously pressing
the UP and DOWN buttons for two seconds.
4) The setting is fixed when the SET button is pushed, and the
cursor moves below by one line.
･
DETAIL
The optimum detail level has been set at the factory. If
necessary, this can be changed as follows.
1) Use the UP and DOWN buttons to shift the cursor to
“DETAIL”, then press the SET button. The adjustment value
at the right of value flashes.
2) Change the “DETAIL” by pressing the UP and DOWN
buttons. (Variable range: -128
〜
000
〜
+127)
3) Return the factory setting(000) by simultaneously pressing
the UP and DOWN buttons for two seconds.
4) The setting is fixed when the SET button is pushed, and the
cursor moves below by one line.
SUB MENU (ITEM: PICTURE)
◆ ＳＵＢ ＭＥＮＵ ◆
>
ＩＴＥＭ ：ＰＩＣＴＵＲＥ
ＣＨＲＯＭＡ ： ０００
ＤＥＴＡＩＬ ： ０００
ＰＥＤＥＳＴＡＬ ： ０００
ＧＡＭＭＡ ：ＯＮ
ＤＮＲ ：ＡＵＴＯ（ＨＩＧＨ）
ＰＯＬＡＲＩＴＹ ：ＰＯＳＩＴＩＶＥ
ＲＥＴ
ＥＮＤ
……
Select SUB MENU item
…… Chroma setting
[*]
…… Detail setting
…… Pedestal level setting
……
Gamma setting
…… Digital noise reduction setting
…… Negative/positive
…… Return to the main menu
…… End of menu display
NOTE
1) The color noise might stand out when the color level
is raised.
2) CHROMA is fixed to “-128” and cannot be adjusted
by the B/W MODE setting at a monochrome image.
(*) Note: KP-E500 is not displayed.
29
30