Hitachi Innovate iPJ-AW250NM User'S Manual And Operating Manual Download Page 98

Page: 98 / 303

Presentation tools

PC-LESS Presentation (continued)

• These operations are not accessible while the projector OSD is displayed.

• The Thumbnail mode shows 20 pictures in 1 page as maximum.
• It is not possible to change the input port by using the

INPUT

button when the

Thumbnail screen, Slideshow, or Full Screen is displayed.
• Some error icons will be displayed in the Thumbnail.

NOTE

This ﬁle seems to be broken or not supported format.

A ﬁle that cannot be displayed on the thumbnail screen is
indicated by a ﬁle format icon.

Summary of Contents for Innovate iPJ-AW250NM
















































































































































































































































































































Search results

Summary of Contents for Innovate iPJ-AW250NM

Reviews:

Brands by name

Popular brands

Hitachi Innovate iPJ-AW250NM, User'S Manual And Operating Manual

Search results

Summary of Contents for Innovate iPJ-AW250NM

Reviews:

Brands by name

Popular brands