manualshive.com logo in svg

Hitachi IC25N020ATMR04, Specifications

The Hitachi IC25N020ATMR04 is a high-performance internal hard drive designed for storage-intensive applications. To quickly set up and install this product, we provide a comprehensive Quick Installation Manual that can be easily downloaded for free from our website. Unlock the full potential of your device with our user-friendly manual at manualshive.com.

Share
Download
background image

Travelstar 80GN Hard Disk Drive Specification

page 93

•

Write Sector(s) EXT

•

Write Verify

Execution includes the transfer of one or more 512 byte (> 512 bytes on Write Long) sectors of data from the host 
to the device.

1.  The host writes any required parameters to the Features, Sector Count, LBA, and Device Registers.

2.  The host writes the command code to the Command Register.

3.  The device sets BSY = 1. 

4.  For each sector (or block) of data to be transferred:

a.  The devics BSY = 0 and DRQ = 1 when it is ready to receive a sector (or block).

b.  The host writes one sector (or block) of data via the Data Register.

c.  The device sets BSY = 1 after it has received the sector (or block).

d.  When the device has finished processing the sector (or block), it sets BSY = 0 and interrupts the host.

e.  In response to the interrupt, the host reads the Status Register.

5.  For the Write Long Command:

a.  The device sets BSY = 0 and DRQ = 1 when it is ready to receive a sector.

b.  The host writes one sector of data including ECC bytes via the Data Register.

c.  The device sets BSY = 1 after it has received the sector.

d.  After processing the sector of data the device sets BSY = 0 and interrupts the host.

e.  In response to the interrupt, the host reads the Status Register.

f.  The device clears the interrupt in response to the Status Register being read.

The Write Multiple command transfers one block of data for each interrupt. The other commands transfer one sec-
tor of data for each interrupt.

If the device detects an invalid parameter, then it will abort the command by setting BSY = 0, ERR = 1, ABT = 1, 
and interrupting the host.

If an uncorrectable error occurs, the device will set BSY = 0 and ERR = 1, store the error status in the Error Regis-
ter, and interrupt the host. The registers will contain the location of the sector in error. The error location will be 
reported with CHS mode or LBA mode. The mode is decided by the mode select bit (bit 6) of the Device/Head reg-
ister on issuing the command.

All data transfers to the host through the Data Register are 16 bits. The ECC bytes are an exception having only 
8 bits.

12.3   Non-data commands

The following are Non-data commands:

•

Check Power Mode

•

Device Configuration FREEZE LOCK

•

Device Configuration RESTORE

•

Enable/Disable Delayed Write

•

Execute Device Diagnostic

•

Flush Cache

•

Flush Cache EXT

Summary of Contents for IC25N020ATMR04























































































































































































































Reviews:

No comments

Related manuals for IC25N020ATMR04

WATSON SEVEN Assembly Instructions Manual preview
SEVEN
Brand: WATSON Pages: 12
Angelbird SSD2go pocket User Manual preview
SSD2go pocket
Brand: Angelbird Pages: 20
Sans Digital ES424X6+BHP Quick Installation Manual preview
ES424X6+BHP
Brand: Sans Digital Pages: 2
Stardom SA2TB3 Quick Setup Manual preview
SA2TB3
Brand: Stardom Pages: 2
Qsan XEVO Manual preview
XEVO
Brand: Qsan Pages: 28
Hama Tenus FlashPen Operating Instruction preview
Tenus FlashPen
Brand: Hama Pages: 4
Denios PolySafe Depot Type C User Manual preview
PolySafe Depot Type C
Brand: Denios Pages: 8
Western Digital WD3000F9YZ Applications preview
WD3000F9YZ
Brand: Western Digital Pages: 2
Metro DataVac MetroMax i Instructions For Use Manual preview
MetroMax i
Brand: Metro DataVac Pages: 16
Buffalo MiniStation HD-PFU2 Series Quick Setup Manual preview
MiniStation HD-PFU2 Series
Brand: Buffalo Pages: 94
Advanced Industrial Computer XI2000 Series XI-316R Specifications preview
XI2000 Series XI-316R
Brand: Advanced Industrial Computer Pages: 2
Facom ROLL.C4M3 Quick Start Manual preview
ROLL.C4M3
Brand: Facom Pages: 2
Marvin Test Solutions GX5280 User Manual preview
GX5280
Brand: Marvin Test Solutions Pages: 50
Medion P89625 Instruction Manual preview
P89625
Brand: Medion Pages: 112
ABSCO SHEDS 3060UTK Manual preview
3060UTK
Brand: ABSCO SHEDS Pages: 58
Promise Technology VTrak S3000 Quick Start Manual preview
VTrak S3000
Brand: Promise Technology Pages: 68
Supermicro 6037R-E1R16L User Manual preview
6037R-E1R16L
Brand: Supermicro Pages: 112
Supermicro 6048R-E1CR24L User Manual preview
6048R-E1CR24L
Brand: Supermicro Pages: 142

Brands by name

Popular brands

Load more brands