Hitachi HUS VM User And Reference Manual Download Page 68

Page: 68 / 530

Title

File name

Command name

User

Synchronous waiting

$ROOT:[HORCM.usr.bin]pairsyncwait.exe

pairsyncwait

sys

Configuration file making

$ROOT:[HORCM.usr.bin]mkconf.exe

sys

Text filtering

$ROOT:[HORCM.usr.bin]rmawk.exe

sys

Database Validator setting

$ROOT:[HORCM.usr.bin]raidvchkset.exe

raidvchkset

sys

DB Validator confirmation

$ROOT:[HORCM.usr.bin]raidvchkdsp.exe

raidvchkdsp

sys

DB Validator confirmation

$ROOT:[HORCM.usr.bin]raidvchkscan.exe

raidvchkscan

sys

Storage Replication Adapter

$ROOT:[HORCM.usr.bin]rmsra.exe

rmsra

sys

Sample file for horcmstart

$ROOT:[HORCM]loginhorcm*.com

sys

Sample file for horcmstart

$ROOT:[HORCM]runhorcm*.com

sys

Note:

•

$ROOT is defined as SYS$POSIX_ROOT. $POSIX_ROOT is necessary when

using C RTL.

•

The user name for OpenVMS is "System".

CCI log and trace files

The CCI software (HORCM) maintains internal startup log files, execution log

files, and trace files that can be used to identify the causes of errors and to

keep records of the status transition history of the paired volumes.

•

CCI log files on page 2-40

•

CCI trace files on page 2-43

•

CCI trace control command on page 2-43

•

Command logging for audit on page 2-43

CCI log files

HORCM logs are classified into startup logs and execution logs.

•

The startup logs contain data on errors that occur before HORCM

becomes ready to provide services. Thus, if HORCM fails to start up due

to improper environment setting, refer to the startup logs to resolve the

problem.

•

The HORCM execution logs (error log, trace, and core files) contain data

on errors that are caused by software or hardware problems. These logs

contain internal error data that does not apply to any user settings,

therefore, you do not need to refer to the HORCM execution logs.

•

When an error occurs in execution of a command, data on the error is

collected in the command log file. Refer to the command log file if a

command execution error occurs.

2-40

CCI software environment

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Search results

Summary of Contents for HUS VM

Reviews:

Brands by name

Popular brands

Hitachi HUS VM, User And Reference Manual

Search results

Summary of Contents for HUS VM

Reviews:

Brands by name

Popular brands