Hitachi HUS VM User And Reference Manual Download

Page: 211 / 530

Priority

Server performance

If the amount of traffic goes down to the threshold, the control of the

upper limit is disabled automatically.
Monitoring information can be displayed according to the combination

of a port and a WWN of a host bus adapter.

Using and managing Server Priority Manager

You can give a nickname (SPM name) to each host WWN to assist in

managing the hosts. You can also manage WWN and the SPM name per

group. The groups to which WWN and the SPM name are registered are

managed uniquely. The following table lists the details for the Server Priority

Manager operations and the management unit.

SPM Operation

Management per port

Management per

system

raidcom modify spm_wwn

prioritized or non-prioritized
upper limit
WWN or SPM name

threshold

raidcom modify spm_group

prioritized or non-prioritized
upper limit
SPM group name

threshold

raidcom add spm_wwn

SPM name

raidcom add spm_group

SPM group name

raidcom delete spm_wwn

SPM name (SPM

information per port is

also deleted.)

raidcom delete spm_group

SPM group name (SPM

information per port is

also deleted.)

raidcom get spm_wwn

prioritized or non-prioritized
upper limit
WWN or SPM name
SPM group name

threshold

raidcom get spm_group

prioritized or non-prioritized
upper limit
SPM group name

threshold

raidcom monitor spm_wwn

performance of server (IOps/

KBps)

control mode of SPM

raidcom monitor spm_group

performance of server (IOps/

KBps)

control mode of SPM

Provisioning operations with CCI

5-57

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Search results

Summary of Contents for HUS VM

Reviews:

Related manuals for HUS VM

Brands by name

Popular brands

Hitachi HUS VM, User And Reference Manual

Search results

Summary of Contents for HUS VM

Reviews:

Related manuals for HUS VM

Brands by name

Popular brands