Ä
23
DVD PLAYBACK
Preparations
Press on the standby button of your audio
system if the player has been connected to an
audio system.
BASIC PLAY:
1.
Press on the standby button
2.
Press
OPEN/CLOSE
to open the disc tray.
3.
Place a disc onto the tray
Hold the disc without touching either of its
surfaces, position it with the printed title side
facing up, align it with the guides, and place it in
its proper position.
4.
Press
OPEN/CLOSE
The disc tray is automatically closed and play
commences.
A menu may appear on the TV screen after a few
moments or the film may start immediately after
the introduction of the Film Company. This
behaviour depends on the disc content and may
change.
Note:
Step 5 is available only when a menu is shown
after the disc is inserted.
Press
3465
or the number button(s) to
select the preferred menu item.
5.
Press SELECT
Play of the selected items now commences. The
played item may be a film, a still picture or another
submenu depending on the disc.
Note:
When using menus the disc controls the
behaviour of the player.
Stopping play and returning to the menu screen
(when a menu is available on the disc)
Press MENU or TITLE button depending on the
disc. Play is suspended, and the Disc menu
screen is displayed.
After operation
When the unit is not in use, remove the disc and
press STANDBY to turn the unit to the standby
mode.
Note:
The disc continues to rotate while the menu is
displayed even after the player has finished
playing a particular item. When no further
selections are to be played, be sure to press the
STOP
button to clear the menu display.
If the disc is placed in upside down (and it is a
single sided disc), the VFD display on the player
will indicate NO DISC.
For your reference:
When
´
appears while a button is being
operated, it means that the disc prohibits the
corresponding operation.
STOPPING PLAY
Press stop twice.
For your convenience:
When play is stopped the unit records the point
where
STOP
was pressed once (RESUME
function). Press
ENTER
again, and play will
resume from this point. When the tray is opened
or the
STOP
is pressed again, the RESUME
function will be cleared.
To stop the play permanently, press
STOP
twice.
When the
STOP
button is pressed for the first time,
a message PRESS PLAY TO CONTINUE will
appear on the screen to remind you if you want to
continue the play. To stop the play, press the
STOP
button again or you can press
ENTER
to continue.
RAPID ADVANCE (RAPID REVERSE)
Press SEARCH/SLOW (
7
Fast reverse or
8
Fast forward) on the remote control or Search
7
or
8
on the main unit during play.
Normal play is resumed when the SELECT or
PLAY/PAUSE button is pressed.
