background image

1. GENERAL DESCRIPTION 

 
1.1 MT 1379 

 
The MT1370 Progressive Scan DVD Player Combo chip  is a single -chip MPEG video decoding chip that 
integrates audio/video stream data processing, TV encoder four video DACs with macrovision, copy protection, 
DVD system navigation, system control and housekeeping functions. 
These features can be listed as follows: 

 
General Features: 

 
- Progressive scan DVD -player combo chip. 
 
-  Support NTSC, PAL-BDGHI, PAL-N, PAL-M interlace TV format and 480p, 576p progressive TV format. 
 
- Built-in progressive video output. 
 
- DVD-Video, VCD 1.1, 2.0 and SVCD. 
 
- Unified track buffer A/V decoding buffer. 
 
- Supports 16-bit/32-bit SDRAM data bus interface. 
 
- Servo controlling and data channel processing. 

 
Video Related Features: 

 
· Macrovision 7.1 for NTSC/PAL interlaced video. 
 
· Simultaneous composite video and S-video outputs, or composite and YUV outputs, or 
composite and RGB outputs. 
 
· 8-bit CCIR 601 YUV 4:2:2 output. 
 
. Decodes MPEG video and MPEG2 main profile at main level. 
 
· Maximum input bit rate of 15 Mbits/sec. 

 
Audio Related Features: 

 
· Dolby Digital (AC-3) and Dolby Pro Logic. 
 
· Dolby Digital S/PDIF digital oudio outputs . 
 
· High-Definition Compatible Digital (HDCD) decoding. 
 
· CD-DA. 
 
· MP3. 

 
 

1.2 MEMORY 

 

 

SDRAM Memory Interface 

 
The MT1379 provides a glueless a 16-bit interface to DRAM memory devices used as  OSD MPEG stream and 
video buffer memory for a DVD player. The maximum amount of memory supported is 16 Mb of  Synchronous 
DRAM ( SDRAM ). The memory interface is configurable in depth to support 128 Mb adressing. The memory 

Summary of Contents for HTD-K180E


















































Reviews: